Heat transfer oil, synthetic heat transfer oil

Solod 1400 synthetic high temperature heat transfer oil

  • SOLOD 1400 (dibenzyltoluene) synthetic high-temperature heat-conducting oil passed the L-QD 330 type test. The temperature of the closed system can reach 330-350 ° C, the boiling point is 390 ° C, and it is still liquid at high temperature and pressure. Good sex, not easy to produce coking, carbon formation, long service life. This product has no peculiar smell, does not corrode equipment, and has a pour point as low as -28 ° C. It is also very convenient when used in winter.
Features Introduction

  Features:

  SOLOD 1400 (dibenzyltoluene) synthetic high-temperature heat-conducting oil passed the L-QD 330 type test. The temperature of the closed system can reach 330-350 ° C, the boiling point is 390 ° C, and it is still liquid at high temperature and pressure. Good sex, not easy to produce coking, carbon formation, long service life. This product has no peculiar smell, does not corrode equipment, and has a pour point as low as -28 ° C. It is also very convenient when used in winter.

  Due to these outstanding advantages of SOLOD 1400 (dibenzyltoluene) synthesis of high temperature heat transfer oil, it is widely used in the polysilicon industry, petrochemical industry, coatings, ink industry, plastics industry, oil industry, chemical fiber industry, rubber processing industry and atomic energy industry. application.

  Technical Parameters:

SOLOD 1400 synthetic high temperature heat transfer oil physical and chemical indicators

project

National standard

Type test result

Detection method

Exterior

Clear and transparent
No suspended matter

Fluorescent purple transparent

Visual inspection

Kinematic viscosity (40 ° C)

mm2/s

≤ 40

16.2

GB/T265

Acid value (in KOH)

mg/g

≤ 0.05

<0.01

GB/T 7304

Flash point (closed)     

≥ 100

202

GB/T 261

Moisture           

mg/kg

≤ 500

46

SH/T 0246

Water soluble acid and alkali

no

no

GB/T 0259

Distillation range (2%)      

 ℃ report

371

GB/T 6536

Density (20 ° C)      

kg/m3

report

1043

SH/T 0604

Carbon residue (mass fraction)

%

≤ 0.05

<0.01

GB/T 17144

Pour point            

report

-23

GB/T 3535

Pour point 

level

≤ 1

1a

GB/T 5096

Spontaneous ignitio          

≥ maximum allowable

459

SH/T 0642

Operating temperature

Chlorine content           

mg/kg

≤20

11

GB 23971

Thermal stability

Test temperature °C

330

330

GB/T 23800

Test time h

1000

1000

Metamorphic rate %

≤10

4.9



Related Products
上海久星导热油股份有限公司  沪ICP备16038071号-1
7mIM3L/Ri9oXq3BxDHnhdUKJ1wQECecUqbqxH3t0V3hGFHZkeYFirL7ISMkLnQRmdyXNqwEUi13fgoH0aue8YjS5/Vq1UFr0EODqfu/1MdP9Mkspqeq6DQ==