Heat transfer oil, synthetic heat transfer oil

Solod 1300 synthetic high temperature heat transfer oil

  • Good thermal stability, not easy to produce coking, carbon formation, normalization rate of 0.91%; boiling point of 280 ° C, can be applied to up to 320 ° C in pressurized closed systems; can be applied in the range of 280 to 330 ° C Gas phase condensation transfers heat without pumping; pour point - 55 °C, even in winter, it does not need to be insulated with steam heating pipe, it can be used as coolant in low temperature range; it is non-corrosive to metal, safe and environmentally friendly.
Features Introduction

  Features:

  Good thermal stability, not easy to produce coking, carbon formation, normalization rate of 0.91%; boiling point of 280 ° C, can be applied to up to 320 ° C in pressurized closed systems; can be applied in the range of 280 to 330 ° C Gas phase condensation transfers heat without pumping; pour point - 55 °C, even in winter, it does not need to be insulated with steam heating pipe, it can be used as coolant in low temperature range; it is non-corrosive to metal, safe and environmentally friendly.

  Technical Parameters:

Table SOLOD®1300 Synthetic High Temperature Heat Transfer Oil Physical and Chemical Index

Project

National standard

Type test result

Detection method

Exterior

Clear and transparent
No suspended matter

Colorless and transparent

Visual inspection

Kinematic viscosity (40 ° C)    mm2/s

≤ 40

2.518

GB/T265

Acid value (in KOH)  mg/g

≤ 0.05

0.01

GB/T 7304

Flash point (closed)        ℃

≥ 100

129.5

GB/T 261

Moisture mg/kg

≤ 500

39

SH/T 0246

Water soluble acid and alkali

no

GB/T 0259

Distillation range (2%) °C

report

271.8

GB/T 6536

Density (20 ° C) kg / m3

report

993.7

SH/T 0604

Carbon residue (mass fraction) %

≤ 0.05

0.01

GB/T 17144

Pour point °C

report

≤- 55

GB/T 3535

Corrosion (Cu, 100 ° C, 3 h) grade

≤ 1

1b

GB/T 5096

Spontaneous ignition point °C

≥ maximum allowable
Operating temperature

480

SH/T 0642

Chlorine content      mg/kg 

≤20

4.0

GB 23971

Thermal stability

Test temperature °C

320

320

GB/T 23800

Test time h

720

720

Metamorphic rate   %

≤10

0.91


Related Products
上海久星导热油股份有限公司  沪ICP备16038071号-1
o5CksF/w8SGxljHZrro9u0KJ1wQECecUqbqxH3t0V3hGFHZkeYFirL7ISMkLnQRmdyXNqwEUi13fgoH0aue8YjS5/Vq1UFr0EODqfu/1MdP9Mkspqeq6DQ==