Carbon rubber

Date: 2018-11-11 Source: Shanghai JiuxingViews:Loading...

The heat transfer oil has the properties of resistance to thermal cracking and chemical oxidation, good heat transfer efficiency, fast heat dissipation and good thermal stability. As a heat transfer medium for industrial oils, heat transfer oil has the following characteristics: Under almost normal pressure conditions, high operating temperatures can be obtained. That is, the operating pressure and safety requirements of the high-temperature heating system can be greatly reduced, the reliability of the system and equipment can be improved, the process requirements of heating and cooling of different temperatures can be met in a wider temperature range, or the same type can be used in the same system. The heat transfer oil simultaneously achieves the process requirements of high temperature heating and low temperature cooling. That is, the complexity of the system and operation can be reduced; the water treatment system and equipment are omitted, the thermal efficiency of the system is improved, and the maintenance workload of equipment and pipelines is reduced. That is, the initial investment and operating costs of the heating system can be reduced.

In the road construction project, the heat transfer oil furnace is mainly used for heating and heat preservation of asphalt heating, dissolving, asphalt storage tank, asphalt concrete and emulsified asphalt.

1. According to the grade of heat-conducting oil and the requirements of thermal process, correctly select various grades of energy-saving heat-conducting oil, and strictly abide by the provisions of the Ministry of Chemical Industry's "Safety Technical Regulations for Heat Carrier Heating Furnace", and correctly use heat-conducting oil.

2. Careful inspection should be carried out during use. Waterproof, acid, alkali and low-boiling substances should be leaked into the use system, and a filtering device should be installed to prevent mechanical impurities from entering and ensuring oil purity.

3. Energy-saving heat transfer oil is suitable for coal, gas, fuel heating furnace as heat carrier, electric heating reactor and other heating equipment, it should have expansion tank and storage tank and other safety components and temperature control instruments and other supporting facilities. To ensure safe operation.

4. When the old heating equipment is replaced with new heat transfer oil, the inner wall debris must be eliminated to avoid affecting the heat transfer efficiency and service life of the heat transfer oil.

5. The heat transfer oil is put into use. After starting the operation, the circulating oil pump is started for half an hour, and then the ignition temperature is raised. When the initial use, the temperature should be slowly increased by 20 ° C per hour. When the temperature rises to about 130 ° C, it should be kept for a while. When the temperature rises to 180 °C-200 °C, it can be put into normal use after being kept for a while.

6. After using the high temperature heat transfer oil for half a year, an oil analysis should be performed.

7. It is strictly forbidden to use over temperature during operation to ensure the normal service life of the heat transfer oil.


The product is refined by advanced technology and has passed the GB23971-2009 national type test. L-QC320 synthetic heat transfer oil has the characteristics of low viscosity, high density and less impurities. The oxidation resistance is up to 400 minutes, and the annual coking rate is only one in ten thousand. The thermal stability is superior to the mineral heat transfer oil, and the fluidity is strong and the energy consumption is low. The maximum temperature can reach 320 °C. Widely used in waterproof materials, textiles, wood, chemicals, carbon, asphalt mixing plants and other industries.

Maximum allowable operating temperature: 320 ° C

The product has passed the national type test (GB23971-2009), its thermal stability, thermal conductivity, high specific heat value, reflected in physical data such as thermal conductivity curve, density curve, viscosity curve, specific heat curve, saturated vapor pressure Curves and volume expansion curves are significantly different than ordinary heat transfer oils. The maximum temperature can reach 310 °C. In terms of main performance indicators, this product is comparable to Mobil 603, British BP, Bayer, Mobile, Shell and other brands. This product has been included in the Shanghai High-tech Achievement Transformation Project.

Maximum allowable temperature: 310 ° C

The product has passed the GB23971-2009 national type test, its thermal stability and thermal conductivity are good, and the specific heat value is high. For example, the thermal conductivity curve, density curve and viscosity curve have significant advantages over ordinary heat transfer oil. The chemical properties of the heat transfer oil are relatively stable. It is not as easy to burn as the light oil. The maximum temperature can reach 300 °C. It is a high-tech achievement transformation project in Shanghai. It is comparable to the heat transfer oils of Mobil 603, British BP and Shell.

Maximum allowable temperature: 300 ° C

Good thermal stability, not easy to produce coking, carbon formation, normalization rate of 0.91%; boiling point of 280 ° C, can be applied to up to 320 ° C in pressurized closed systems; can be applied in the range of 280 to 330 ° C Gas phase condensation transfers heat without pumping; pour point - 55 °C, even in winter, it does not need to be insulated with steam heating pipe, it can be used as coolant in low temperature range; it is non-corrosive to metal, safe and environmentally friendly.

Maximum allowable operating temperature: 320 ° C

SOLOD 1400 synthetic high-temperature heat-conducting oil has passed the L-QD 330 type test. Its closed temperature can reach 330-350 ° C, its boiling point is 390 ° C, it is still liquid under high temperature and normal pressure, its thermal stability is good, and it is not easy to produce coking. , carbonization, long service life. This product has no peculiar smell, does not corrode equipment, and has a pour point as low as -28 ° C. It is also very convenient when used in winter.

Maximum allowable temperature: 330 ° C

Previous:Carbon rubber


Related case:

上海久星导热油股份有限公司  沪ICP备16038071号-1
22jSAv22w504SV0+xg4aw0KJ1wQECecUqbqxH3t0V3hGFHZkeYFirL7ISMkLnQRmdyXNqwEUi13fgoH0aue8YjS5/Vq1UFr0EODqfu/1MdP9Mkspqeq6DQ==